In order to reset the clock, you must have Administrator password access to the system. (Detailed instructions can be found in the Administrator’s Manual under Function 1-6).
On any ESI phone within the system, press PROG/HELP or PROGRAM.
Stop the prompt by pressing HOLD.
Enter the Administrator password and then press #.
Access Function 6-1 by pressing 6 1.
After the prompt, press 5 4 0 to select system prompt 540, which is the holiday greeting.
If you have already recorded the holiday greeting, the system will play it for you.
If you are satisfied with the currently recorded holiday greeting, skip to step 8.
To record the holiday greeting, press 1. This will replace any existing recording.
The system will then prompt you through the normal recording of the holiday greeting.
When finished, press #. The system will then play back the newly recorded holiday greeting.
To keep the recording, press # to accept; if not, go back to step 6.
Press # again to accept the holiday greeting.
This is the greeting that now will play when your system is put in holiday mode through the use of a programmed Day/Night key.